HeatProfile Heating - Technical Specification
Radiant Heating Systems
HeatProfile (Water)

Comprising aluminium extrusion, incorporating 18mm copper lined water channel functioning as a one-piece heat emitter and fascia. Serrated conduit at rear of panel for location to mounting brackets. All panel joints are made with HeatProfile unique PushFit system and all circuits terminate with 15mm pipes. 		Radiant Heating Systems
HeatProfile (Electric)

Direct acting system, comprising aluminium extrusion functioning as a one piece heat emitter and fascia, incorporating totally enclosed insulated element and auto-reset thermal safety cut-out. Terminal box each end for connection to mains voltage and /or other panels. Serrated conduit at rear of panel to house panel wiring and for location to mounting brackets (supplied).
System To include all ‘above floor’ components, flow and return manifolds, valves, air bleeds and drains, matching corner, joint and service covers to conceal all pipework. Thermostatic radiator valve (TRV) with remote sensing head for individual room temperature control. Matching unheated panel available
Dimensions 140mm x 25mm
Panel Lengths In any continuous length up to 6000mm in 200mm increments (may be trimmed on site as required).
Heat Output 170 watts per metre at dT 60 degrees C in accordance with BS EN442-2 1997 at dT 60 degrees C (Outputs are approximately 20% less for dT 50 degrees C)
Capacity 0.216 Litres / metre.
System To include corner and joint covers, end stops and remote thermostat for control of each circuit. Matching unheated panel available.






Dimensions 140mm x 25mm
Panel Lengths 18 panel lengths to 4400mm (each standard length includes an unheated section for trimming on site by up to 200mm). Lengths from 4400mm to 6000mm to special order. Can be supplied to exact measurement, without unheated trimming section, thereby maximising element length and output.
Heat Output Single element rating: 150 watts per element metre.
(list of standard lengths with outputs available on application)
Circuit Load 3Kw (maximum).
Supply 220 / 240 volts single-phase 50Hz.
Special Dual element rating: 300 watts per element metre to order
NB for Atrium, Rooflight Heating etc where touch temperature is not an issue.
home heating radiant heating systems water diagram
Click image to view

 electric radiant home central heating system diagram
Click image to view
HeatProfile is an all British development
patented internationally
HeatProfile (electric) is designed in
accordance with international -
standard EN 60335-2-30
EUROPEAN 054 2785 USA 545 9810
068 1667 574 3327
electric radiant heating systems pic
radiant home heating systems water radiant heating system pic
 

>> FEATURES COMMON TO ELECTRIC AND WATER-BASED SYSTEMS:
  Application:
Skirting Heating / Perimeter Heating / Threshold Heating / Atrium or Rooflight Heating.

Finish:
Polyester powder coat HIPCA White (RAL9910) -30% gloss. Other RAL & BS colours to special order. Panels may be over painted using radiator paint to match new or existing décor. 		  Notes:
(i) Mounting brackets with adjustable vertical slide component for ease of alignment during installation.
(ii) Special angles can be fabricated (angle or template required).
(iii) Panels can be curved to continuous or variable arc (radius or template required).
(iv) Panels can be interlocked to provide a stacked unit to any height (in increments of 140mm) for higher outputs.
(v) Maintenance – occasional wipe down with a cloth.